Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON.
Verify the rearview camera has no debris on the lens and that the bezel and bezel seal are not damaged.
- If debris is found on the lens
  Clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
- If no debris on the lens
Engine running, transmission in REVERSE.
Verify the backup lamps are illuminated.
- If the backup lamps are not illuminated
  Refer to Backup Lamps Malfunction (Automatic transmission)Backup Lamps Malfunction (Manual Transmission) .
- If the backup lamps are illuminated
Engine running, transmission in REVERSE.
Verify a clear rear vision image is displayed on the P17 Info Display Module.
- If a clear image is not displayed
  Refer to Circuit/System Testing.
- If a clear image is displayed
All OK.