A/F Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

O2 Sensor Wrench, Snap-on S6176 or equivalent, commercially available

Remove the cowl cover and the under-cowl panel (see COWL COVER REPLACEMENT ).
Disconnect the A/F sensor connector (A).

Fig 1: Identifying A/F Sensor Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the A/F sensor (A).

Fig 2: A/F Sensor With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.