MAP Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cowl cover and the under-cowl panel (see COWL COVER REPLACEMENT ).
Disconnect the MAP sensor 3P connector (A).

Fig 1: MAP Sensor 3P Connector With Torque Specifications And O-Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the MAP sensor (B).
Install the parts in the reverse order of removal with a new O-ring (C).