Installation Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery current sensor by passing the ground end of the negative battery cable through the sensor.
- Wrap electrical tape around the battery current sensor in order to secure the battery current sensor to the negative battery cable.
- Return the cable eyelet to its original configuration.
- Install the battery to battery tray negative battery cable. Refer to Battery Negative Cable Replacement (Battery to Battery Tray) or Battery Negative Cable Replacement (Engine To Chassis) .
NOTE:
Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.