LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Driveline/Axle) >> Dynamic Damper Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dynamic Damper Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the inboard joint (see INBOARD JOINT SIDE  ).
  2. Remove the dynamic damper band (see step  1 ).
  3. Remove the dynamic damper (A).
    Fig 1: Identifying Dynamic Damper
    G06430387Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install a new dynamic damper to the right driveshaft.
  5. Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.

    Right driveshaft: 477.5-482.5 mm (18.80-19.00 in) 

    Fig 2: Identifying Specified Distance Between Outboard Joint Side And Dynamic Damper Edge
    G06430388Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install a new dynamic damper band (see step  10 ).
  7. Install the inboard joint (see INBOARD JOINT SIDE  ).
scientia non olet · About LEMON Manuals