Steering Power Variable Control Module Replacement

WARNING: This page is about a different car, the 2013 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Power Variable Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the Instrument panel cluster lower compartment. Refer to Instrument Panel Cluster Lower Compartment Replacement .
1	Steering Power Variable Control Module Procedure Disconnect the electrical connector from the control module. Release the retaining tabs and remove the control module from the body control module bracket. After installation is complete, refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure
Remove the Instrument panel cluster lower compartment. Refer to Instrument Panel Cluster Lower Compartment Replacement .

Steering Power Variable Control Module

Procedure

Disconnect the electrical connector from the control module.
Release the retaining tabs and remove the control module from the body control module bracket.
After installation is complete, refer to Control Module References for programming and setup information.