LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2014 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Vehicle Diagnostic Information) >> Specifications >> Communication Interface Module Scan Tool Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Communication Interface Module Scan Tool Information

WARNING: This page is about a different car, the 2012 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.
Telematics Communication Interface Control Module Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions:  Ignition ON
GPS Data 
  • Dead Reckoning Calibration Status
 - Calibrated or Not Calibrated Indicates the dead reckoning calibration status.
  • Position Calibration Method
 - Varies Indicates the method used to determine current location. (0) GPS, (1) Wheel Speed Dead Reckoning only, (2) Combined Wheel Speed and GPS, (3) Gyro only, (4) Combined Gyro and GPS, (5) No Fix
  • Month
 - MM This displays the current month.
  • Day
 - DD This displays the current day of the month.
  • Year
 - YY This displays the current year.
  • Hour
 - HH This displays the GPS current hour (24 hour format - GMT).
  • Minute
 - MM This displays the GPS current minute.
  • Second
 - SS This displays the GPS current second.
  • GPS Signal
 - Varies The scan tool displays Yes or No. Yes is displayed if there is a GPS signal received by the telematics communication interface control module.
Signal Strength Data 
  • Current Transceiver Identifier
 - Varies The scan tool displays a 2-5 digit value. This is the transceiver identification number.
  • GSM Signal Strength
 - Varies The scan tool displays 0-127. This is the telematics communication interface control module signal strength.
  • Signal Type
 - Digital This is the signal type received by the telematics communication interface control module.
Bluetooth Data 
  • Bluetooth
 - Enabled Indicates if the Bluetooth system is enabled or disabled.
  • Bluetooth Link Status
 - Varies Indicates the current link status. (0) Unconnected, (1) Connected / Idle, (2) Call active, (3) 3-way calling active
  • Bluetooth Link Quality
 - Varies The scan tool displays a decimal value between 0 and 255.
  • Bluetooth Phone to Telematics Communication Interface Control Module Authentication Status
 - Active or Inactive Displays the bluetooth phone to telematics communication interface control module authentication status.
  • Bluetooth Phone to Telematics Communication Interface Control Module Communication Status
 - Active or Inactive Displays the bluetooth phone to telematics communication interface control module status.
  • Bluetooth Phone Voice Recognition Status
 - Active or Inactive Displays the bluetooth phone to voice recognition status.
Telematics Communication Interface Control Module Scan Tool Output Controls

Output Control Description
B1000 Information This shows the data recorded when DTC B1000 was set in the telematics communication interface control module.
Green Indicator The telematics communication interface control module illuminates the green LED when ON is selected.
Phone Call Test When ON is selected, telematics communication interface control module commands OnStar to connect to the OnStar Center.
Red Indicator The telematics communication interface control module illuminates the red LED when ON is selected.
Preferred Roaming List Update The telematics communication interface control module performs a preferred roaming list (PRL) update when this is selected.
Remote Vehicle Speed Limiting Reset This function resets the speed limiting feature.
scientia non olet · About LEMON Manuals