LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2015 >> Regal Base, 2.4L Eng VIN K >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (NU6) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Fuel Tank Module & O-Ring
    GM2205628Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW seal (2) and the fuel tank module (1).
    2. Fig 2: Lock Ring
    GM2205627Courtesy of GENERAL MOTORS COMPANY
  2. Use the J 45722  fuel sender lock ring wrench and install the lock ring (1).
    3. Fig 3: Fuel Pump Electrical Connector & Quick Connects
    GM2205626Courtesy of GENERAL MOTORS COMPANY
  3. Connect the fuel pump electrical connector and the fuel tank pressure sensor electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals