LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2015 >> Regal Base, 2.4L Eng VIN K >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (NU6) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Fuel Pump Electrical Connector & Quick Connects
    GM2205626Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel pump electrical connector and the fuel tank pressure sensor electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 2: Lock Ring
    GM2205627Courtesy of GENERAL MOTORS COMPANY
  3. Use the J 45722  fuel sender lock ring wrench and remove the lock ring (1).
    4. Fig 3: Fuel Tank Module & O-Ring
    GM2205628Courtesy of GENERAL MOTORS COMPANY
  4. Remove the fuel tank module (1) and the O-ring (2).
scientia non olet · About LEMON Manuals