Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition OFF, measure and record the battery voltage at the C1 12V battery terminals. The battery voltage should stabilize between 12.4 and 12.8V within a few minutes of turning the ignition OFF.
- If not within the specified range, refer to Battery Inspection/Test
- Start and idle the engine, accessories OFF, measure and record the battery voltage at the battery terminals. The voltage should be at least 1V greater than the voltage measured in step 1 but less than 15V.
- If not within the specified range, refer to Circuit/System Testing.