Front and Rear Parking Assist Control Module Scan Tool Information
Parking Assist Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Parking Assist ON | |||
| System Voltage | - | 11-14V | The scan tool displays V. This is the current battery voltage. |
| Vehicle Speed | - | km/h | The scan tool displays km/h. This is the current vehicle speed. |
| Reverse Gear Signal | Transmission in reverse | 0 = Disabled 1 = Enabled |
The scan tool displays Reverse Gear, Disabled or Enabled. |
| Trailer Connection Detected | - | 0 = No 1 = Yes |
The scan tool displays Yes or No. On is displayed if there is an object within the measuring range of the object sensors. |
| Trailer Hitch | - | 0 = Not Installed 1 = Installed |
The scan tool displays Installed or Not Installed Trailer Hitch. |