Approximate Fluid Capacities
The following approximate capacities are given in US English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level as recommended in this manual. Recheck fluid level after filling.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Cooling System | ||
|
7.4 liters | 7.8 quarts |
|
7.1 liters | 7.5 quarts |
|
9.6 liters | 10.1 quarts |
| Engine Oil with Filter | ||
|
4.7 liters | 5.0 quarts |
|
5.7 liters | 6.0 quarts |
|
4.7 liters | 5.0 quarts |
| Automatic Transmission Fluid | ||
|
5.0-7.0 liters | 5.3-7.4 quarts |
|
5.0-7.0 liters | 5.3-7.4 quarts |
|
4.0-6.0 liters | 4.2-6.3 quarts |
|
4.0-6.0 liters | 4.2-6.3 quarts |
|
8.0-8.5 liters | 8.5-9.0 quarts |
|
7.0-9.0 liters | 7.4-9.5 quarts |
| Manual Transmission Fluid (F40) | ||
| Transmission Fluid Capacity Dry Transmission | 1.8 liters | 1.9 quarts |
| Transmission Fluid Capacity Refill | 1.7 liters | 1.8 quarts |
| Transfer Case Oil GM P/N 19256084 (Canadian P/N 19256085) | 0.65liter | 0.69quart |
| Hydraulic Brake System | 0.464liter | 0.981pints |
| Abrupt Refrigerant Loss | 60 ml1 | 2.0 oz1 |
| Compressor Replacement | ||
|
NOTE:
The service compressor is shipped with 74 ml2
(2.5 oz2
) or 40 ml2
(1.4 oz2
) of PAG oil. Refer to the oil balance instructions for information regarding the specific service compressor oil charge.Compressor failure can occur if the oil removed during the refrigerant recovery is not replaced. |
||
| Condenser Replacement | 30 ml2 | 1.0 oz2 |
| Evaporator Replacement | 90 ml2 | 3.0 oz2 |
| Any Line Set (Hose/Tube or Tube Assembly) Replacement | 30 ml2 | 1.0 oz2 |
| Total System PAG Oil Capacity | 110.0 ml | 3.7 oz |
| R-134a | ||
| Refrigerant Charge -LEA/LUK | 0.68 kg | 1.50 lb |
| Refrigerant Charge -LTG | 0.60 kg | 1.30 lb |