Installation Procedure
- Install the rear window into the opening with an assistant. Refer to Adhesive Installation of Stationary Windows (Rear Window) Adhesive Installation of Stationary Windows (Windshield) Adhesive Installation of Stationary Windows (Body Side Front Window) Adhesive Installation of Stationary Windows (Quarter Window) .
- Connect the rear window defogger electrical connectors to the bus bars.
- Connect the rear window radio antenna connector.
- Install the left and right body lock pillar trim panel. Refer to Body Lock Pillar Trim Panel Replacement (without Roof Side Rail Airbag)Body Lock Pillar Trim Panel Replacement (with Roof Side Rail Airbag) .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Connect the battery. Refer to Battery Negative Cable Disconnection and Connection .