Removal Procedure
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.
- Relieve the fuel system pressure.- Fuel Pressure Relief
- Battery Negative Cable Disconnection and Connection - Disconnect
- Engine Sight Shield Replacement - Remove
- Turbocharger Coolant Return Pipe Replacement - Remove
- Cable Tie (3) - Remove
- Disconnect the electrical connector. (4)
- Fuel Injection Fuel Rail Fuel Pressure Sensor (2) - Remove @ Fuel Injection Fuel Rail Assembly (1)
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Goggles and Fuel Warning .
CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .