Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

In the event of an interrupted or unsuccessful programming event, perform the following steps:

Ignition ON. Ensure the K109 Frontview Camera Module, DLC and programming tool connections are secure and the SPS software is up to date.
Verify the K109 Frontview Camera Module can be reprogrammed.
- If the K109 Frontview Camera Module cannot be reprogrammed
1. Ignition OFF for one minute, ignition ON.
2. Verify the K109 Frontview Camera Module can be reprogrammed.
  - If the K109 Frontview Camera Module cannot be reprogrammed, replace the K109 Frontview Camera Module.
  - If the K109 Frontview Camera Module can be reprogrammed.
3. All OK.
- If the K109 Frontview Camera Module can be reprogrammed
All OK.