Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to Brake Fluid Irritant Warning .

CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

Remove the electronic brake and traction control module with brake pressure modulator valve assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
Remove the electronic brake control module (EBCM) bolts (1),

Fig 1: Electronic Brake Control Module (EBCM) And Bolts
Courtesy of GENERAL MOTORS COMPANY
Carefully separate the EBCM (1) from the brake pressure modulator valve (BPMV).

Fig 2: EBCM And Brake Pressure Modulator Valve (BPMV)
Courtesy of GENERAL MOTORS COMPANY
Clean the sealing surfaces of the EBCM and the brake pressure modulator valve with denatured alcohol and allow to dry.
NOTE: Do not pry the components apart.