LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  3. Remove the drive belt. Refer to Drive Belt Replacement .
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  5. Remove the protective boot (1) and the battery positive cable fastener (2).
    Fig 1: Protective Boot And Battery Positive Cable Fastener
    GM2814562Courtesy of GENERAL MOTORS COMPANY
  6. Remove the battery positive cable terminal (3) and the engine harness connector (4).
  7. Remove the lower generator mounting fastener (2).
    Fig 2: Lower Generator Mounting Fastener
    GM2814561Courtesy of GENERAL MOTORS COMPANY
  8. Remove the upper generator mounting fasteners (1).
    Fig 3: Upper Generator Mounting Fasteners
    GM2814560Courtesy of GENERAL MOTORS COMPANY
  9. Remove the generator (1) from the engine compartment.
    Fig 4: Generator
    GM2814558Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals