LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Cascada Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Front Suspension System) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2016 Chevrolet Malibu Limited. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Front Lower Control Arm Bushing Bolt (Requires a NEW Bolt.) 
  • First Pass:
 55 N.m 41 lb ft
  • Final Pass:
 90-105 degrees
Front Lower Control Arm Front Bolt (Requires a NEW Bolt.) 
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 90-105 degrees
Front Lower Control Arm Rear Bolt (Requires a NEW Bolt.) 
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 90-105 degrees
Front Stabilizer Shaft Insulator Clamp Bolt (Requires a NEW Bolt.) 
  • First Pass:
 22 N.m 16 lb ft
  • Final Pass:
 30-45 degrees
Front Stabilizer Shaft Link Nut 65 N.m 48 lb ft
Front Suspension Strut Mount Nut 55 N.m 41 lb ft
Front Suspension Strut Nut 70 N.m 52 lb ft
Front Wheel Bearing and Hub Assembly Bolt (Requires a NEW Bolt.) 
  • First Pass:
 100 N.m 74 lb ft
  • Final Pass:
 60-75 degrees
Steering Knuckle Nut @ Front Lower Control Arm (Requires a NEW Bolt.) 
  • First Pass:
 50 N.m 37 lb ft
  • Second Pass:
 Loosen 120 degrees
  • Third Pass:
 50 N.m 37 lb ft
  • Final Pass:
 30-45 degrees
Steering Knuckle Nut @ Strut Assembly
  • First Pass:
 85 N.m 63 lb ft
  • Final Pass:
 60-75 degrees
scientia non olet · About LEMON Manuals