LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Encore Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Sensor Replacement (KL9) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Battery Sensor Electrical Connector
    GM4098026Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the electrical connector.(1)
    2. Fig 2: Battery Negative Cable
    GM4098029Courtesy of GENERAL MOTORS COMPANY
  2. Use an open ended wrench to hold the battery sensor ground tab, while loosening the battery negative cable nut.
  3. Battery Negative Cable Nut (3) - Remove
  4. Battery Negative Cable(2) - Remove
    5. Fig 3: Battery Sensor Module
    GM4098031Courtesy of GENERAL MOTORS COMPANY
  5. Battery Negative Post Clamp Nut (1) - Loosen
  6. Battery Sensor Module(2) - Remove
scientia non olet · About LEMON Manuals