Installation Procedure
- Connect the electrical connectors.
- Reposition the instrument carrier to install the communication interface module bracket.
- Communication Interface Module Bracket (1) - Install
- Communication Center Call Transceiver Bracket Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
- Communication Interface Module Bracket Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
- Instrument Panel Compartment Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
- Instrument Carrier Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
- Instrument Panel Knee Bolster Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
- Instrument Panel Lower Center Trim Plate Applique (1) - Install - Instrument Panel Lower Center Trim Plate Applique Replacement
- Front Floor Console Rear Air Duct-Front (2) - Install - Front Floor Console Rear Air Duct Replacement (Front)Front Floor Console Rear Air Duct Replacement (Rear)Front Floor Console Rear Air Duct Replacement (CJ4 Rear)
- Front Floor Console (3) - Install - Front Floor Console Replacement
CAUTION: