LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Fuel Feed Front Pipe Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Fuel Pressure Sensor Electrical Connector
    GM3993227Courtesy of GENERAL MOTORS COMPANY
  1. Connect the fuel feed front pipe (2) and install to retainers (3). Plastic Collar Quick Connect Fitting Service 
  2. Connect the fuel pressure sensor electrical connector.(1)
  3. Lower the vehicle.
    4. Fig 2: Fuel Feed Front Pipe
    GM3926749Courtesy of GENERAL MOTORS COMPANY
  4. Install the fuel feed front pipe (1) to the retainers (2).
    5. Fig 3: Fuel Pipe Shield
    GM4175820Courtesy of GENERAL MOTORS COMPANY
  5. Fuel Pipe Shield (1) - Install
  6. Fuel Feed Pipe Replacement (Engine) Fuel Feed Pipe Replacement (Tank)  - Connect
  7. Lower the vehicle
  8. Cycle the ignition to run the fuel pump and inspect for fuel leaks.
scientia non olet · About LEMON Manuals