Removal Procedure
- Fuel Pressure Relief - Relieve the fuel pressure:
- Fuel Tank Draining - Drain the fuel tank.
- Lifting and Jacking the Vehicle - Raise and support the vehicle.
- Two-Piece Propeller Shaft Replacement - Remove
- Exhaust Muffler Replacement - Remove
- Disconnect the fuel pressure sensor electrical connector (1).
- Disconnect the evaporative emission and fuel pipes (2). Plastic Collar Quick Connect Fitting Service
- Disconnect the fuel pump electrical connector (1).
- Disconnect the evaporative emission pipes (1). Plastic Collar Quick Connect Fitting Service
- Remove the fuel tank filler hose clamp (1).
- Remove the fuel tank filler hose (2).
- Disconnect the fuel tank filler pipe (3). Plastic Collar Quick Connect Fitting Service
- Remove the fuel tank bolt (1).
- Place a suitable adjustable jack under the fuel tank.
- Remove the fuel tank strap fasteners (1).
- Remove the fuel tank straps (2).
- Remove the fuel tank (1) from the vehicle.
- If replacing fuel tank transfer parts as necessary.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .