Distance Sensing Cruise Control Module Scan Tool Information
WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
Cruise Control Vehicle Distance Sensor Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Engine Running/Cruise Control ON | |||
| Automatic Alignment Learn Progress | - | Varies | The scan tool displays a percent complete value. This is the current status of the alignment progress. |
| Automatic Alignment Learn Status | - | Learn Successful | The scan tool displays Off, Ready, Learn Failed. Learn Successful or Busy. This is the learn state of the automatic alignment. |
| Brake Pedal Position Sensor | - | Varies | The scan tool displays Released or Applied depending on the state of the brake pedal |
| Cruise Control Disengage History 1-4 | - | Varies | This is the state of the ACC disable history. |
| Cruise Control Driver Memory | - | - | Driver 1 or Driver 2 |
| Cruise Control Inhibit Data | - | - | This is the cruise control inhibit reason. |
| Cruise Control On/Off Switch Status | - | On | The scan tool displays On or Off. This is the state of the cruise on/off switch. |
| Cruise Control Throttle Override By Driver | - | Varies | The scan tool displays Active or Inactive. This is the state of the throttle override. |
| Cruise Control Throttle Override By Driver Indicator Message | - | - | Active/Inactive |
| Distance Sensing Cruise Control Status | - | - | Active/Inactive |
| Distance Sensing Cruise Control Type | - | - | Full Speed Range or Limited Speed Range |
| Following Distance Setting | - | Varies | The scan tool displays Stage 1, Stage 2 or Stage 3. This is the selected following distance. |
| Horizontal Alignment Angle | - | - | The scan tool displays a percentage value. |
| Ignition Voltage Signal | - | 11-14 V | The scan tool displays a voltage value. This is the current ignition voltage signal. |
| Radar Needs Cleaning | - | No | The scan tool displays Yes or No. |
| Radar Temporarily Unavailable Indicator Message | - | - | Active/Inactive |
| Service Radar Display Message | - | Inactive | The scan tool displays Active or Inactive. Active will be displayed when the cruise control vehicle distance sensor module detects a malfunction in the ACC system. |
| System Voltage | - | 11-14 V | The scan tool displays a voltage value. This is the current battery voltage. |
| Vertical Alignment Angle | - | - | The scan tool displays a percentage |
Cruise Control Vehicle Distance Sensor Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Distance Sensing Cruise Control Service Alignment | The cruise control vehicle distance sensor module will activate the alignment/calibration procedure when selected. |