Circuit/System Description
WARNING: This page is about a different car, the 2016 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
The active antenna system uses an integral antenna applied as an appliqu e to the rear glass. The antenna amplifier receives both AM and FM signals from the rear glass antenna. The radio antenna amplifier is enabled when the radio is turned on. The radio provides battery voltage to the antenna amplifier using the center conductor of the antenna coaxial cable. When a 12 V signal is seen by the amplifier on the center conductor of the antenna coax, both AM and FM signals are amplified.