Windshield Washer Solvent Container Level Sensor Replacement
WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement
.
- Disconnect the windshield washer level sensor electrical connector.
- Place a clean suitable drain pan under the level sensor area in order to contain the loss windshield washer solvent.
- Use two medium sized flat-bladed tools under the level sensor grommet and pry in opposite directions, disengage the level sensor from the windshield washer container.
- Remove and discard the level sensor grommet.
|
| 1 |
Windshield Washer Solvent Container Level Sensor |
| 2 |
Windshield Washer Solvent Container Level Sensor Grommet
Procedure
Top off the windshield washer solvent container with new windshield washer solvent. |