April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor Replacement

Fig 1: Crankshaft Position Sensor

GM3460265

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the starter. Refer to Starter Replacement (LTG Front Wheel Drive)Starter Replacement (LTG All Wheel Drive) .

1

Crankshaft Position Sensor Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

2

Crankshaft Position Sensor

Procedure

Disconnect the electrical wiring harness connector from the crankshaft position sensor.
Install a NEW seal if not replacing the sensor.
After installation of the sensor, perform the crankshaft position system variation learn procedure. Refer to Crankshaft Position Variation Learn .