Disassembly Procedure

WARNING: This page is about a different car, the 2015 Buick Verano. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front suspension strut from the vehicle. Refer to Strut Assembly Removal and Installation .

Fig 1: Compressing/Releasing Lower Part Of Shock Spring

Courtesy of GENERAL MOTORS COMPANY

Install the front suspension strut in the CH 6066 compressor (1).

NOTE:

The spring is compressed when the strut moves freely.

Using the CH 6066 compressor (1), compress the front spring (2).

Fig 2: TORX ® Bit And Special Wrench

Courtesy of GENERAL MOTORS COMPANY

Using a TORX® bit (1) and the CH 35669 wrench (2), remove the front suspension strut nut.

Fig 3: View Of Compressor Forcing Screw & Coil Spring

Courtesy of GENERAL MOTORS COMPANY

Remove the front suspension strut mount and the front spring (2) from the CH 6066 compressor (1).