Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Ignition and Start Switch Housing Bolt | The Ignition Lock Cylinder Bolt tears off after reaching fixation torque |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Positive Cable Fastener | 4.5N.m(40 lb in) |
| Body Wiring Harness Nut | 2.5N.m(22 lb in) |
| Body Wiring Harness Rear Compartment Fuse Block Nut | 9N.m(80 lb in) |
| Front Compartment Fuse Block Bolt | 7N.m(62 lb in) |
| Front Compartment Fuse Block Cable Nut | 17N.m(13 lb ft) |
| Front Compartment Fuse Block Housing Nut | 22N.m(16 lb ft) |
| Front Compartment Fuse Block Wiring Harness Supply Fastener | 12N.m(106 lb in) |
| Power Steering Wiring Harness Nut | 4.7N.m(42 lb in) |
| Rear Body Fuse Block Nut | 9N.m(80 lb in) |
| Starter Generator Cable Nut | 12N.m(106 lb in) |
| Wiring Harness Bracket Bolt | 22N.m(16 lb ft) |