LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2017 >> Cascada Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM2027819Courtesy of GENERAL MOTORS COMPANY

    Install the current sensor (2) to the battery negative cable (1).

  2. GM2027817Courtesy of GENERAL MOTORS COMPANY

    Install the current sensor (5) to the battery tray.

  3. Connect the wiring harness current sensor plug (4).
  4. GM2027762Courtesy of GENERAL MOTORS COMPANY

    Install the battery negative cable (2).

    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the battery ground cable nut (1) and tighten to 9 N.m (80 lb in).
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  7. Close the hood.
scientia non olet · About LEMON Manuals