Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Engine Coolant Thermostat Housing Gasket |
| Engine Oil Cooler Seal |
| Oil Cooler Housing Seal |
| Turbocharger Coolant Feed Pipe Clamp |
| Turbocharger Coolant Feed Pipe Fitting Seal |
| Turbocharger Coolant Feed Pipe Seal Ring |
| Turbocharger Coolant Return Pipe Clamp |
| Turbocharger Coolant Return Pipe Fitting Seal |
| Water Outlet Seal |
| Water Pump Inlet Pipe Seal |
| Water Pump Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Turbocharger Coolant Feed Pipe Fitting | 24 N.m (18 lb ft) |
| Turbocharger Coolant Return Pipe Fitting | 24 N.m (18 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Auxiliary Water Pump Bracket Bolt | 10 N.m (89 lb in) |
| Engine Coolant Fan Motor Bolt | 4 N.m (35 lb in) |
| Engine Coolant Fan Resistor Bolt | 4 N.m (35 lb in) |
| Engine Coolant Thermostat Housing Bolt | 9 N.m (80 lb in) |
| Engine Oil Cooler Assembly Bolt | 25 N.m (18 lb ft) |
| Engine Oil Cooler Bolt | 9 N.m (80 lb in) |
| Hood Hold Open Rod Retainer Bracket Bolt | 22 N.m (16 lb ft) |
| Radiator Bracket Bolt | 25 N.m (18 lb ft) |
| Radiator Drain Cock | 2 N.m (18 lb in) |
| Radiator Support Bracket Bolt | 22 N.m (16 lb ft) |
| Radiator Vent Valve | 2 N.m (18 lb in) |
| Turbocharger Coolant Feed Pipe Bracket Bolt | 10 N.m (89 lb in) |
| Turbocharger Coolant Feed Pipe to Turbocharger | 20 N.m (15 lb ft) |
| Turbocharger Coolant Return Pipe Bracket Fastener | 10 N.m (89 lb in) |
| Water Outlet Housing Bolt | 7 N.m (62 lb in) |
| Water Pump Housing Bolt | 9 N.m (80 lb in) |
| Water Pump Inlet Pipe Bolt | 25 N.m (18 lb ft) |
| Water Pump Pulley Bolt | 9 N.m (80 lb in) |