Circuit/System Testing
- Ignition OFF, disconnect the radio antenna coax cable from the A11 Radio and from the K46 Radio Antenna Module.
- Verify the antenna coax cable passes the coax cable component test. Refer to Component Testing.
- If the coax cable does not pass the test
Replace the antenna coax cable
- If the coax cable passes the test
- If the coax cable does not pass the test
- Connect the antenna coax cable to the A11 Radio. Ignition ON, A11 Radio ON.
- Verify a test lamp illuminates between the antenna coax cable center terminal and ground at the K46 Radio Antenna Module connector.
- If the test lamp does not illuminate
Replace the A11 Radio.
- If the test lamp illuminates
- If the test lamp does not illuminate
- Test or replace the K46 Radio Antenna Module.