LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P15A3: Stop/Start Select Switch Circuit Signal Message Counter Incorrect >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON
  2. Verify no DTCs are set in the K9 BCM.
    • If no DTCs are set 
  3. Verify the scan tool Stop/Start Select Switch parameter changes between Active and Inactive when pressing and releasing the ECO switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing

    • If the parameter changes 
  4. All OK.
scientia non olet · About LEMON Manuals