LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Battery Assist Handles
    GM3910920Courtesy of GENERAL MOTORS COMPANY
  1. Install the battery (2) into position on the battery tray using the assist handles (1).
    2. Fig 2: Retainer Bracket
    GM3910916Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the battery retaining bracket (1) and tighten the fastener (2) to 9 N.m (80 lb in).
    3. Fig 3: Battery Fuse Block Cover
    GM3910914Courtesy of GENERAL MOTORS COMPANY
  3. Install the battery fuse block (3) into position on the battery positive post (4) and tighten the fastener (2) to 4.5 N.m (40 lb in).
  4. Close the battery fuse block cover (1).
  5. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection .
  6. Reprogram the window express function. Window Motor Programming - Express Function
  7. Calibrate the power steering control module. Power Steering Control Module Calibration
scientia non olet · About LEMON Manuals