Circuit/System Verification
- Verify that DTC B101D symptom byte 3C is not set as current.
- If DTC B101D symptom byte 3C is set as current
Reprogram the K109 Frontview Camera Module
- If DTC B101D symptom byte 3C is not set as current
- If DTC B101D symptom byte 3C is set as current
- Verify that DTC B101D is not set as current.
- If DTC B101D is set as current
Replace the K109 Frontview Camera Module
- If DTC B101D is not set as current
- If DTC B101D is set as current
- All OK.