LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2017 >> LaCrosse Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> Adaptive Cruise Control Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON.
  2. Verify there are no other DTCs set and that there are no communication DTCs set in the vehicle.
    • If no DTC's are set 
  3. Verify the Active Safety Control Module scan tool parameter Adaptive Cruise Control Inhibit History Data 1-6 and Adaptive Cruise Control Disengage History Data 1-6 indicate no current malfunction. Refer to Active Safety Control Module Scan Tool Information
    • If not the specified state 

      Diagnose the system that sets the malfunction.

    • If the specified state 
  4. Verify the scan tool parameter:B233B Radar Sensor Module - Long Range - Long Range Radar Sensor Module Misaligned - Angled Down=No
    • If the parameter does not display the following:Long Range Radar Sensor Module Misaligned - Angled Down=No 

      Align the B233B Radar Sensor Module - Long Range and perform the Radar Sensor Module - Long Range Learn 

    • If the parameter displays the following:Long Range Radar Sensor Module Misaligned - Angled Down=No 
  5. Verify the scan tool parameter:B233B Radar Sensor Module - Long Range - Long Range Radar Sensor Module Misaligned - Angled Left=No
    • If the parameter does not display the following:Long Range Radar Sensor Module Misaligned - Angled Left=No 

      Align the B233B Radar Sensor Module - Long Range and perform the Radar Sensor Module - Long Range Learn 

    • If the parameter displays the following:Long Range Radar Sensor Module Misaligned - Angled Left=No 
  6. Verify the scan tool parameter:B233B Radar Sensor Module - Long Range - Long Range Radar Sensor Module Misaligned - Angled Right=No
    • If the parameter does not display the following:Long Range Radar Sensor Module Misaligned - Angled Right=No 

      Align the B233B Radar Sensor Module - Long Range and perform the Radar Sensor Module - Long Range Learn 

    • If the parameter displays the following:Long Range Radar Sensor Module Misaligned - Angled Right=No 
  7. Verify the scan tool parameter:B233B Radar Sensor Module - Long Range - Long Range Radar Sensor Module Misaligned - Angled Up=No
    • If the parameter does not display the following:Long Range Radar Sensor Module Misaligned - Angled Up=No 

      Align the B233B Radar Sensor Module - Long Range and perform the Radar Sensor Module - Long Range Learn 

    • If the parameter displays the following:Long Range Radar Sensor Module Misaligned - Angled Up=No 
  8. Verify the scan tool parameter: K109 Frontview Camera Calibration Status = Calibrated. Refer to Front View Camera Module Scan Tool Information (without Active Safety System, UGN)Front View Camera Module Scan Tool Information (with Active Safety System, UGN)
    • If the specified state 
  9. All OK.
scientia non olet · About LEMON Manuals