Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Catalytic Converter Seal |
| Exhaust Front Pipe Gasket |
| Exhaust Muffler Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Exhaust Manifold Bolt (LTG) | 20 N.m (15 lb ft) |
| Exhaust Manifold Nut (LEA) | |
|
14 N.m (124 lb in) |
|
14 N.m (124 lb in) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bolt (LEA) | 58 N.m (43 lb ft) |
| Catalytic Converter Brace Bolt (LTG Lower) | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bolt (LTG Upper) | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Bolt (LTG) | 22 N.m (16 lb ft) |
| Catalytic Converter to Exhaust Front Pipe Nut (LUK, LTG) | 25 N.m (18 lb ft) |
| Catalytic Converter to Exhaust Manifold Nut (LEA) | 50 N.m (37 lb ft) |
| Catalytic Converter to Turbocharger Nut (LTG) | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Bracket Bolt (LTG) | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Hanger Bracket Bolt (LTG) | 22 N.m (16 lb ft) |
| Exhaust Front Pipe to Muffler Nut (LTG) | 18 N.m (13 lb ft) |
| Exhaust Isolator Bolt (LTG) | 35 N.m (26 lb ft) |
| Exhaust Manifold Heat Shield Bolt (LTG) | 14 N.m (124 lb in) |
| Exhaust Rear Muffler Heat Shield Fastener (LTG) | 1.5 N.m (13 lb in) |
| Exhaust Rear Pipe Hanger Bracket Bolt | 20 N.m (15 lb ft) |
| Turbocharger Studs (LTG) | 10 N.m (89 lb in) |