Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Stabilizer Shaft Link Nut | 65 N.m (48 lb ft) |
| Front Stabilizer Shaft Link Nut | 65 N.m (48 lb ft) |
| Front Suspension Support Bolt | |
|
60 N.m (44 lb ft) |
|
30- 45 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain and Front Suspension Frame Front and Rear Bolt | 160 N.m (118 lb ft) |
| Front Compartment Splash Shield Bolt | 3 N.m (27 lb in) |
| Intermediate Steering Shaft Lower Bolt | 34 N.m (25 lb ft) |
| Power Steering Wiring Harness Bracket Bolt | 9 N.m (80 lb in) |
| Radiator Support Bracket Bolt | 22 N.m (16 lb ft) |
| Transmission Front and Rear Mount Bolt | 100 N.m (74 lb ft) |
| Underbody Rear Air Deflector Nut | 3 N.m (27 lb in) |