Circuit/System Testing
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X3 harness connector at the audio amplifier.
- Ignition ON, Radio ON, Mute OFF, test for test for less than 1.0 V between the appropriate signal circuit terminal listed below and ground.
- terminal 4 (UQG)
- terminal 11 (UQA/UQS)
- If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the radio.
- If all circuits test normal, replace the audio amplifier.