Disassembly Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Remove Strut Assembly - Strut Assembly Removal and Installation

Fig 1: Compressing/Releasing Lower Part Of Shock Spring

Courtesy of GENERAL MOTORS COMPANY

Install the strut assembly (2) in the CH-45400 compressor (1).

Fig 2: Compressor Forcing Screw & Coil Spring

Courtesy of GENERAL MOTORS COMPANY

NOTE:

The front spring is sufficiently compressed when the strut moves freely.

Turn the spring compressor forcing screw (1) until the front spring (2) is sufficiently compressed.
Use a suitable tool to hold the strut rod and use the CH-42991 socket to remove the front suspension strut nut.
Loosen the forcing screw (1) until the tension on the front spring (2) is released.
Transfer or replace the strut assembly components as necessary.