Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Wheel Bearing and Hub Assembly Bolt | |
|
100 N.m (74 lb ft) |
|
65 - 75 degrees |
| Wheel Stud | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Ball Stud Nut at Front Lower Control Arm | 68 N.m (50 lb ft) |
| Front Lower Control Arm Ball Stud Nut at Steering Knuckle | |
|
50 N.m (37 lb ft) |
|
60 - 80 degrees |
| Front Lower Control Arm Front Bushing Nut | 75 N.m (55 lb ft) |
| Front Lower Control Arm Front Nut | 195 N.m (144 lb ft) |
| Front Lower Control Arm Rear Nut | 150 N.m (111 lb ft) |
| Front Stabilizer Shaft Insulator Clamp Bolt | |
|
30 N.m (22 lb ft) |
|
90 - 105 degrees |
| Front Stabilizer Shaft Link Nut at Front Stabilizer Shaft | 75 N.m (55 lb ft) |
| Front Stabilizer Shaft Link Nut at Front Strut | 80 N.m (59 lb ft) |
| Front Suspension Shock Absorber Upper Mounting Nut | 45 N.m (33 lb ft) |
| Front Suspension Strut Nut | 85 N.m (63 lb ft) |
| Steering Knuckle Nut | 195 N.m (144 lb ft) |