Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Suspension Cradle Mounting Bolt | |
|
90 N.m (66 lb ft) |
|
60 - 75 Degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain and Front Suspension Cradle Mounting Bolt | 160 N.m (118 lb ft) |
| Front Cradle Brace Fastener (Long Bolt) | 160 N.m (118 lb ft) |
| Front Cradle Brace Fastener (Short Bolt) | 30 N.m (22 lb ft) Plus 55 - 70 degrees |
| Front Cradle Mount Bracket Fastener (Long Bolt) | 160 N.m (118 lb ft) |
| Front Cradle Mount Bracket Fastener (Short Bolt) | 58 N.m (43 lb ft) |
| Front Tire Front Air Deflector Fastener | 2.5 N.m (22 lb in) |
| Front Wheelhouse Liner Fastener | 2.5 N.m (22 lb in) |
| Front Wheelhouse Splash Shield Fastener | 2.5 N.m (22 lb in) |
| Rear Tire Front Air Deflector Fastener | 2.5 N.m (22 lb in) |
| Rear Wheelhouse Liner Fastener | 2.5 N.m (22 lb in) |
| Underbody Front Air Deflector Fastener | 2.5 N.m (22 lb in) |
| Underbody Left Rear Air Deflector Nut | 3 N.m (27 lb in) |
| Underbody Right Rear Air Deflector Nut | 3 N.m (27 lb in) |