Removal Procedure
- Open the liftgate.
- Quarter Window Trim Finish Panel Replacement - Remove
- Cover the seats and the carpeting to protect from broken glass.
- Use BO-39032
stationary glass removal tool, or equivalent in order to remove the body side stationary window.
- Leave a base of urethane on the pinchweld flange.
- The only suitable lubrication is clear water.
Remove the locator pins (1) and body side window (2) from the vehicle.
WARNING:
WARNING:
NOTE:
Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
WARNING:
If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.
NOTE:
Keep the cutting edge of the tool against the body side rear window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.