Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Exhaust Front Pipe Gasket |
| Exhaust Front Pipe Gasket to Exhaust Rear Muffler |
| Exhaust Manifold Gasket |
| Exhaust Pipe Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain And Front Suspension Frame Support Bolt | |
|
60 N.m (44 lb ft) |
|
30-45 degrees |
| Exhaust Front Pipe Hanger Bracket Bolt | |
|
22 N.m (16 lb ft) |
|
30-45 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Bracket Bolt | 22 N.m (16 lb ft) |
| Catalytic Converter Front Heat Shield Bolt | 9 N.m (80 lb in) |
| Catalytic Converter Front Heat Shield Upper Nut | 9 N.m (80 lb in) |
| Catalytic Converter to Front Pipe Nut | 22 N.m (16 lb ft) |
| Catalytic Converter Nut | 58 N.m (43 lb ft) |
| Exhaust Front Pipe Hanger Bracket Bolt M10 | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 17 N.m (13 lb ft) |
| Exhaust Manifold Bolt | 20 N.m (15 lb ft) |
| Exhaust Manifold Heat Shield Bolt | 10 N.m (89 lb in) |
| Exhaust Pipe Clamp | 30 N.m (22 lb ft) |
| Exhaust Pipe Front Hanger Insulator Nut | 17 N.m (13 lb ft) |
| Exhaust Pipe Nut | 22 N.m (16 lb ft) |
| Exhaust Rear Auxiliary Muffler Bracket Bolt | 22 N.m (16 lb ft) |
| Exhaust Tail Pipe Clamp | 30 N.m (22 lb ft) |
| Exhaust Tail Pipe Hanger Bracket Bolt | 22 N.m (16 lb ft) |
| Turbocharger Brace Bolt | 25 N.m (18 lb ft) |