Fastener Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Air Inlet Valve Actuator Bolt(Temperature) | 1.5 N.m (13 lb in) |
| Air Inlet Valve Actuator Bolt(Recirculation) | 1.2 N.m (11 lb in) |
| Heater and Air Conditioning Control Bracket Bolt | 2.5 N.m (22 lb in) |
| Heater and Air Conditioning Control Screw | 1.0 N.m (9 lb in) |
| Heater and Air Conditioning Evaporator and Blower Module Bracket Bolt | 1.5 N.m (13 lb in) |
| Heater and Air Conditioning Mode Control Cam Bolt | 2.0 N.m (18 lb in) |
| Mode Control Cable Retaining Screw | 2.0 N.m (18 lb in) |
| Mode Control Cam Actuator Bolt | 1.5 N.m (13 lb in) |
| Temperature Control Cable Retaining Screw | 2.0 N.m (18 lb in) |