Side Object Sensing Alert Module Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle
1	Side Object Sensing Alert Module Bolt CAUTION: Fastener Caution Tighten 2.5N.m (22 lb in)
2	Side Object Sensing Alert Module Procedure Disconnect the electrical connector. Perform the necessary programming and setup procedure:Control Module References Lower the vehicle. Lifting and Jacking the Vehicle

Callout

Component Name

Preliminary Procedure
Raise and support the vehicle. Lifting and Jacking the Vehicle

Side Object Sensing Alert Module Bolt

CAUTION:

Fastener Caution

Tighten
2.5N.m (22 lb in)

Side Object Sensing Alert Module

Procedure

Disconnect the electrical connector.
Perform the necessary programming and setup procedure:Control Module References
Lower the vehicle. Lifting and Jacking the Vehicle