Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Bumper Fascia Bolt | 2.5 N.m (22 lb in) |
| Rear Closure Center with License Plate Applique Nut | 4.7 N.m (42 lb in) |
| Rear End Spoiler Bolt | 2 N.m (18 lb in) |
| Rear End Spoiler Nut | 5 N.m (44 lb in) |
| Rear Wheelhouse Panel Liner Bolt | 2.5 N.m (22 lb in) |