Rearview Driver Information Camera Replacement

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Rear Closure Center with License Plate Applique Replacement
1	Rearview Driver Information Camera NOTE: This kit is to be used for antenna coax cables ONLY. It should not be used for rear view camera coax cable as connector ends are not sealed and could cause corrosion. Procedure Disconnect all electrical connectors. Depress the clip fingers (arrow) and push outward to remove the rearview camera from the applique.

Callout

Component Name

Preliminary Procedure
Rear Closure Center with License Plate Applique Replacement

Rearview Driver Information Camera

NOTE:

This kit is to be used for antenna coax cables ONLY. It should not be used for rear view camera coax cable as connector ends are not sealed and could cause corrosion.

Procedure

Disconnect all electrical connectors.
Depress the clip fingers (arrow) and push outward to remove the rearview camera from the applique.