Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| O-Ring at PTU Output Shaft |
| O-Ring at Rear Differential Input Shaft |
| Retaining Ring at PTU Output Shaft |
| Retaining Ring at Rear Differential Input Shaft |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Propeller Shaft Bearing Support Bolt | 58 N.m (43 lb ft) |