LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2019 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Component Connector End Views (K36-K182)) >> Component Connector End Views >> K39 Liftgate Control Module X3 (TC2)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

K39 Liftgate Control Module X3 (TC2)

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
GM1469285Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Liftgate
  • OEM Connector: 19179972
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 14-Way F 0.64, 2.8 YESC Series (L-GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-35 (VT) No Tool Required Not Required Not Required Not Required Not Required
II Not Required J-35616-64B (LT BU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 1.5 BN/WH 5799 Lift Gate Open/Close Motor Close Control I -
2 1.5 WH 5798 Lift Gate Open/Close Motor Open Control I -
3 - 7 - - - Not Occupied - -
8 0.5 BN/RD 5803 Lift Gate Position Sensor 5V Reference II -
9 0.35 BU/WH 5805 Lift Gate Position Sensor Signal 1 II -
10 0.35 BN/YE 5806 Lift Gate Position Sensor Signal 2 II -
11 0.35 BK/GN 5804 Lift Gate Position Sensor Low Reference II -
12 - - - Not Occupied - -
13 0.35 BU/YE 6795 Lift Glass/Rear Compartment Lid Motor Release Control 2 II -
14 - - - Not Occupied - -