Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Pipe Fitting - Left Front, Left Rear, Right Front, Right Rear | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Bolt | 9 N.m (80 lb in) |
| Brake Pressure Modulator Valve Bracket Bolt | 22 N.m (16 lb ft) |
| Electronic Brake Control Module Bolt | 5.1 N.m (45 lb in) |
| Master Cylinder Primary Brake Pipe Fitting | 25 N.m (18 lb ft) |
| Master Cylinder Secondary Brake Pipe Fitting | 25 N.m (18 lb ft) |
| Vehicle Dynamic Sensor Fastener | 9 N.m (80 lb in) |
| Wheel Speed Sensor Bolt | 6 N.m (53 lb in) |